Audi S7 Wheels and Rims

Audi S7 Aftermarket Wheel Fitment

The Audi S7 is the warm performance variant of the A7 executive fastback, with a larger engine, sport-tuned chassis, and Quattro all wheel drive. Element Wheels measures the S7 across two modern generations: C7 (2013-2018) and the current C8 (2020 and up). Both generations use 5x112 with a 66.56mm hub bore and M14x1.5 lug bolts, the same hub spec as the A7 and RS7 of the same era. The S7 is a same-chassis sibling of the A7 in each generation, and our measured brake package on the S7 matches the A7 of the same chassis. The visual differences (sport bumpers, quad exhaust, trim badging) sit on top of the same underlying wheel architecture. Pick your generation below for the fitment specs that apply. The full performance RS7 is tracked as its own hub because its brake package and offset window step up further from the S7.

Find Your Audi S7 Generation

Pick your chassis to see wheels and rims that fit your specific S7. Bolt pattern is 5x112 across every modern S7 with a 66.56mm hub bore and M14x1.5 lug bolts. The S7 shares chassis architecture with the A7 of the same generation. Looking for the full performance RS7? Visit the dedicated Audi RS7 wheels and rims hub.

The Audi S7 Bolt Pattern

Every modern S7 uses 5x112 with M14x1.5 lug bolts. Audi runs lug bolts on its sedans and fastbacks, not studs and nuts the way most American and Asian platforms do. The lug bolt threads directly into the hub, the wheel sits between the head of the bolt and the hub face, and there is no fixed lug stud to align the wheel before tightening. This makes a hub-centric fit more important on the S7 than on a stud-and-nut car. The centerbore is 66.56mm on both the C7 (2013-2018) and the current C8 (2020 and up). The S7 line started in the C7 era so the 66.56mm hub has been the spec from day one on this nameplate.

Same-chassis cross-shopping: a wheel that fits a C7 A7 (2011-2018) of the right offset bolts to a C7 S7, and a wheel that fits a C8 A7 (2019 and up) of the right offset bolts to a C8 S7. The bolt math works because the S7 is the A7 chassis with a different powertrain and trim. The 5x112 / 66.56mm spec also matches the RS7 of the same generation. Compare against the A7 chassis hub at our Audi A7 wheels and rims hub, against the RS7 hub linked above, and against the rest of the Audi lineup at our Audi wheels and rims hub.

Why the S7 Brake Package and Body Determine Wheel Fit

The S7 ships with a performance brake package. Front brake is larger than rear across every modern S7 generation, which is standard on a performance sedan or fastback of this caliber. Our measured front brake on the S7 sits at the same brake-size tier as the A7 of the same chassis in our catalog. The practical aftermarket window on the S7 reflects that: a wheel that fits a C7 A7 of the right offset will generally fit a C7 S7, and the same on the C8. The full performance RS7 is the platform where the brake package steps up materially from the standard A7 architecture, particularly on the carbon-ceramic variants. Quattro AWD is standard on every S7 so drivetrain is not a fitment variable on this car.

Square (non-staggered) is the standard configuration on the S7. The S7 ships with Quattro AWD on every modern generation, and Audi Quattro benefits from the same wheel and tire size on every corner. The measured catalog window puts the S7 at the same width front and rear in the recommended setup. Aftermarket staggered builds (slightly wider rear) are available as a choice on the C7 and C8 but are not the factory default. Customers who want a factory-staggered fitment should look at the RS7 instead.

Every wheel we recommend is backed by our Fitment Guarantee. If a wheel does not fit, we pick up the wheels and refund 100 percent. No risk to you.

How We Confirm Fitment on Audi S7 Wheels

Element Wheels measures fitment on the platforms we sell wheels for, including both S7 generations. For the S7 that means clearance from the wheel to the fender, gap between the back of the wheel and the suspension, front and rear brake caliper height, hub bore confirmation at 66.56mm, and lug bolt seat depth for M14x1.5 bolts. At our fitment facility in Chandler, Arizona, the Element Wheels team measures directly on the physical platforms we support. We don't pull specs from manufacturer sheets the way most retailers do.

Audi S7 Wheels and Rims FAQ

Get Audi S7 Wheels Right the First Time

Pick your chassis above to see wheels and rims that fit. We measure on the S7 platform across the C7 and C8, share chassis with the A7 of the same generation, and route RS7 buyers to the dedicated hub to avoid mis-fits on the largest Audi brake package. Find your fit and start enjoying your build sooner.